Fuel issues
Thread Starter
|
Stage I
Joined: May 2014
Posts: 1
Likes: 0
From: Roswell nm
Fuel issues
I have a 2009 cross bones. I have one hell of a intern mitten problem. About a year a go it started running rough had no power at all it would only idle and put home. I could here the furl pump ocslate up and down. The next day nothing it kinda fixed it selYf I took the bike to Phoenix this weekend it started doing it again up there I red the codes p0131 p0151 p0374 p0562 then I get on 34454-07E I have disconnected the batt to reset codes but those same ones keep coming up. I don't have any pin holes in my fuel lines in the tank all my connections there are good. Can any one help me out any one had this kinda problem. I am trying to figure out what to do next. I don't just want to start replacing parts till I find the right one and the check engine light comes on for bout 30 seconds right after I start it up.
Last edited by Scoddy; May 8, 2014 at 12:11 PM.
Stage I
Joined: Jul 2024
Posts: 1
Likes: 0
From: California
HOW DID YOU FIX THIS?? PLEASE
I am having the exact same issue right now and have been for a month. I have replaced all my sensors and fuel system, Im about to miss Sturgis if I cant get this handled this week.
I have a 2009 cross bones. I have one hell of a intern mitten problem. About a year a go it started running rough had no power at all it would only idle and put home. I could here the furl pump ocslate up and down. The next day nothing it kinda fixed it selYf I took the bike to Phoenix this weekend it started doing it again up there I red the codes p0131 p0151 p0374 p0562 then I get on 34454-07E I have disconnected the batt to reset codes but those same ones keep coming up. I don't have any pin holes in my fuel lines in the tank all my connections there are good. Can any one help me out any one had this kinda problem. I am trying to figure out what to do next. I don't just want to start replacing parts till I find the right one and the check engine light comes on for bout 30 seconds right after I start it up.
Thread
Thread Starter
Forum
Replies
Last Post
joebotics
Sportster Models
14
Nov 29, 2012 05:33 PM
lsubigmac
Ignition/Tuner/ECM/Fuel Injection
2
Oct 24, 2011 01:20 PM
