Deuce Pictures
4th Gear
Joined: Apr 2006
Posts: 8
Likes: 0
RE: How about a deuce picture thread
These Dueces look great!!! It's nice to find a place where there's other people who saw the potential and share the passion.
I particually like the post of Deuce Dude's before and after pics. Amazing!
The cups are interesting. I'm also curious how much you dropped the forks?
I particually like the post of Deuce Dude's before and after pics. Amazing!
The cups are interesting. I'm also curious how much you dropped the forks?
ORIGINAL: deuce dude
no problem man....i wasn't sure you guys were interested in the cups. some people look down on them as the cheap way to rake...lol....I SAY YES!!! about time something was cheap and easy...this is the kit i used.....vulcan
i talked to the guy quite a bit before i did it and it was not to hard besides geting the old bearing races out(i used a dremel)....like i said before, its inexpensive(sounds better than cheap), reasonably easy(time consuming) and gives a 3 degree rake that is reversible if you want to later.....only fabrication was a fork stop i had welded in. i didn't know at the time i could get a fork stop from the same site....i like mine better though.....you will have to press out the old steering shaft, any shop with a hyd press can do it...nice weekend project ............
no problem man....i wasn't sure you guys were interested in the cups. some people look down on them as the cheap way to rake...lol....I SAY YES!!! about time something was cheap and easy...this is the kit i used.....vulcan
i talked to the guy quite a bit before i did it and it was not to hard besides geting the old bearing races out(i used a dremel)....like i said before, its inexpensive(sounds better than cheap), reasonably easy(time consuming) and gives a 3 degree rake that is reversible if you want to later.....only fabrication was a fork stop i had welded in. i didn't know at the time i could get a fork stop from the same site....i like mine better though.....you will have to press out the old steering shaft, any shop with a hyd press can do it...nice weekend project ............
ORIGINAL: voodoo93
DD - please elaborate on the cups - you can PM me if you desire but I am sure we would all like the info
DD - please elaborate on the cups - you can PM me if you desire but I am sure we would all like the info
Road Master
Joined: May 2006
Posts: 823
Likes: 0
RE: How about a deuce picture thread
thanks alpha.....i like the tougher look of your rides ....i was wanting a more badd@ss look to mine but it ended up a little too shiny for that look....lol
ORIGINAL: ALPHA MALE
nice clean look not over done i like it !
nice clean look not over done i like it !
Road Master
Joined: May 2006
Posts: 823
Likes: 0
RE: How about a deuce picture thread
thats a nice ride you have there!!....welcome to hdforums. actually i didn't drop the forks, the lowering effect comes from the rake.....part of the reason i did it....
ORIGINAL: Jof76
These Dueces look great!!! It's nice to find a place where there's other people who saw the potential and share the passion.
I particually like the post of Deuce Dude's before and after pics. Amazing!
The cups are interesting. I'm also curious how much you dropped the forks?
These Dueces look great!!! It's nice to find a place where there's other people who saw the potential and share the passion.
I particually like the post of Deuce Dude's before and after pics. Amazing!
The cups are interesting. I'm also curious how much you dropped the forks?
ORIGINAL: deuce dude
no problem man....i wasn't sure you guys were interested in the cups. some people look down on them as the cheap way to rake...lol....I SAY YES!!! about time something was cheap and easy...this is the kit i used.....vulcan
i talked to the guy quite a bit before i did it and it was not to hard besides geting the old bearing races out(i used a dremel)....like i said before, its inexpensive(sounds better than cheap), reasonably easy(time consuming) and gives a 3 degree rake that is reversible if you want to later.....only fabrication was a fork stop i had welded in. i didn't know at the time i could get a fork stop from the same site....i like mine better though.....you will have to press out the old steering shaft, any shop with a hyd press can do it...nice weekend project ............
no problem man....i wasn't sure you guys were interested in the cups. some people look down on them as the cheap way to rake...lol....I SAY YES!!! about time something was cheap and easy...this is the kit i used.....vulcan
i talked to the guy quite a bit before i did it and it was not to hard besides geting the old bearing races out(i used a dremel)....like i said before, its inexpensive(sounds better than cheap), reasonably easy(time consuming) and gives a 3 degree rake that is reversible if you want to later.....only fabrication was a fork stop i had welded in. i didn't know at the time i could get a fork stop from the same site....i like mine better though.....you will have to press out the old steering shaft, any shop with a hyd press can do it...nice weekend project ............
ORIGINAL: voodoo93
DD - please elaborate on the cups - you can PM me if you desire but I am sure we would all like the info
DD - please elaborate on the cups - you can PM me if you desire but I am sure we would all like the info
4th Gear
Joined: Apr 2006
Posts: 8
Likes: 0
RE: How about a deuce picture thread
nice, looking good man. Thanks
ORIGINAL: deuce dude
thats a nice ride you have there!!....welcome to hdforums. actually i didn't drop the forks, the lowering effect comes from the rake.....part of the reason i did it....
thats a nice ride you have there!!....welcome to hdforums. actually i didn't drop the forks, the lowering effect comes from the rake.....part of the reason i did it....
Outstanding HDF Member
Joined: May 2005
Posts: 2,525
Likes: 4
From: Montreal, Canada
RE: How about a deuce picture thread
Special shout out to Pro1955 for a good run at bike of the month
for september. That's a hell of a ride you got there and this contest
is in no way indicative of it's beauty.
for september. That's a hell of a ride you got there and this contest
is in no way indicative of it's beauty.
Outstanding HDF Member
Joined: May 2005
Posts: 2,525
Likes: 4
From: Montreal, Canada
RE: How about a deuce picture thread
Deuce Dude is back in for bike of the month. And this time he's packing
the new tins. Let's all show our support and vote for him when the votes
begin. So far we have two Deuces for bike of the year. Let's make it
three.
the new tins. Let's all show our support and vote for him when the votes
begin. So far we have two Deuces for bike of the year. Let's make it
three.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Master
Joined: May 2006
Posts: 823
Likes: 0
RE: How about a deuce picture thread
yes, your bike is bad @ss......one of my favorites....
ORIGINAL: Crazy Canuck
Special shout out to Pro1955 for a good run at bike of the month
for september. That's a hell of a ride you got there and this contest
is in no way indicative of it's beauty.
Special shout out to Pro1955 for a good run at bike of the month
for september. That's a hell of a ride you got there and this contest
is in no way indicative of it's beauty.
Road Master
Joined: May 2006
Posts: 823
Likes: 0
RE: How about a deuce picture thread
yes, i'm a little better equipped(i hope)than last time...
ORIGINAL: Crazy Canuck
Deuce Dude is back in for bike of the month. And this time he's packing
the new tins. Let's all show our support and vote for him when the votes
begin. So far we have two Deuces for bike of the year. Let's make it
three.
Deuce Dude is back in for bike of the month. And this time he's packing
the new tins. Let's all show our support and vote for him when the votes
begin. So far we have two Deuces for bike of the year. Let's make it
three.