Need a good builder
Thread Starter
|
Cruiser
Joined: Sep 2006
Posts: 237
Likes: 0
From: San Antonio, TX.
Need a good builder
Hi folks, I'm in SA TX. And I'm looking to do a big boar engine upgrade build. Looking for someone who really knows there stuff and provides good customer service. Have you had any good expirieces and know someone you would recommend ? It can be from another near by city or town whitin reasonable distance. Any recommendations welcomed, Thanks...
Elite HDF Member
Joined: Sep 2012
Posts: 3,791
Likes: 57
From: N Texas
If you don't mind coming up to the DFW area, take your bike to GMR Performance, Steve can do any kind of build you need and an expert dyno tuner to boot.
Had to add: Steve is somewhat opinionated and a bit different sort of person but doing Harley anything, well he is one of the best, period.
Had to add: Steve is somewhat opinionated and a bit different sort of person but doing Harley anything, well he is one of the best, period.
Last edited by HD Pilot; Apr 26, 2015 at 10:11 AM.
Thread Starter
|
Cruiser
Joined: Sep 2006
Posts: 237
Likes: 0
From: San Antonio, TX.
If you don't mind coming up to the DFW area, take your bike to GMR Performance, Steve can do any kind of build you need and an expert dyno tuner to boot.
Had to add: Steve is somewhat opinionated and a bit different sort of person but doing Harley anything, well he is one of the best, period.
Had to add: Steve is somewhat opinionated and a bit different sort of person but doing Harley anything, well he is one of the best, period.
Elite HDF Member
Joined: Sep 2012
Posts: 3,791
Likes: 57
From: N Texas
Well he has tuned me twice and helped me on on decision making on several things but I like to do things myself so I just had AMS in Ft Worth bore out my cylinders with some basic headwork and I did all the installing.
Looking back I wish I had used Steve more, I think his 577 Genesis cams would have been a better choice for my particular build. Also looking at numerous dyna charts that Steve has posted with those cams have been very impressive (mainly 103" through 110" type builds).
Looking back I wish I had used Steve more, I think his 577 Genesis cams would have been a better choice for my particular build. Also looking at numerous dyna charts that Steve has posted with those cams have been very impressive (mainly 103" through 110" type builds).
Last edited by HD Pilot; Apr 26, 2015 at 01:19 PM.
Road Captain
Joined: Jun 2006
Posts: 714
Likes: 1
From: TX
Jim Kallay at Phantom Rider Choppers, 7 miles west of New Braunfels on 46. Does it all, from full custom builds to daily maintenance. Also a certified Dyno Tuner. www.phantomriderchoppers.com
Been taking my bikes there since 2008, great guy.
Been taking my bikes there since 2008, great guy.
Thread Starter
|
Cruiser
Joined: Sep 2006
Posts: 237
Likes: 0
From: San Antonio, TX.
Jim Kallay at Phantom Rider Choppers, 7 miles west of New Braunfels on 46. Does it all, from full custom builds to daily maintenance. Also a certified Dyno Tuner. www.phantomriderchoppers.com
Been taking my bikes there since 2008, great guy.
Been taking my bikes there since 2008, great guy.
Thread
Thread Starter
Forum
Replies
Last Post
