Recommend some bars...
Seasoned HDF Member
Joined: Sep 2009
Posts: 25,306
Likes: 2,443
From: Eastern NE
I'm looking at going with these bars from Road 6 Customs...right here, down the road, in Nebraska: http://store.road6customs.com/Handlebars_c2.htm
I got lucky and stumbled on the Biltwell MX bars.
Medium width, not too wide, not too narrow.
Similar height to stock bars, no cable or wire changes.
Moderate pullback without being too far back, too flat, or to extreme on the wrists.
Medium width, not too wide, not too narrow.
Similar height to stock bars, no cable or wire changes.
Moderate pullback without being too far back, too flat, or to extreme on the wrists.
+1 on the Z bars... Got mine from licks. They are the 14" fatty Z's... Gives a little girth to the top to better match up with the rest of the tubing on the bike.
Here's what I'm currently running:
Here's the 8"ers I had before:
Notice the thickness difference between the two.
Here's what I'm currently running:
Here's the 8"ers I had before:
Notice the thickness difference between the two.
Thread Starter
|
Tourer
Joined: Apr 2015
Posts: 255
Likes: 0
From: Richmond Hill, GA, USA
+1 on the Z bars... Got mine from licks. They are the 14" fatty Z's... Gives a little girth to the top to better match up with the rest of the tubing on the bike.
Here's what I'm currently running:
Here's the 8"ers I had before:
Notice the thickness difference between the two.
Here's what I'm currently running:
Here's the 8"ers I had before:
Notice the thickness difference between the two.
I'm also really diggin that headlight grill! Good lookin bike!
Thread
Thread Starter
Forum
Replies
Last Post
