Bike died. Need help
Thread Starter
|
Intermediate
Joined: Jul 2017
Posts: 40
Likes: 4
From: Michigan
Bike died. Need help
2017 Iron 883
riding along at 65mph, 35 miles into my trip bike died. Running fine before. Fulepack system code reads B2104 system power output overload. Bikes turns over. Won't start. Acts like it's not getting gas.
anybody have an idea? Thanks in advance
riding along at 65mph, 35 miles into my trip bike died. Running fine before. Fulepack system code reads B2104 system power output overload. Bikes turns over. Won't start. Acts like it's not getting gas.
anybody have an idea? Thanks in advance
Last edited by RedIronHarley; Aug 16, 2017 at 05:43 PM.
Thread Starter
|
Intermediate
Joined: Jul 2017
Posts: 40
Likes: 4
From: Michigan
Problem solved. Took it to dealer. Broken wires on the electrical harness.
Apparently when I did the tank lift and wire tuck, I should have used better tape. It rubbed through and was arching on the frame.
They're going to solder them back together.
An easy fix, but expensive mistake. $170. Sometimes stupid hurts.
Apparently when I did the tank lift and wire tuck, I should have used better tape. It rubbed through and was arching on the frame.
They're going to solder them back together.
An easy fix, but expensive mistake. $170. Sometimes stupid hurts.
Thread
Thread Starter
Forum
Replies
Last Post
MurderedIron883
Ignition/Tuner/ECM/Fuel Injection
0
Aug 6, 2012 04:07 PM
zuppy51
Sportster Models
0
Jan 24, 2010 02:54 PM
