risers
Seasoned HDF Member
Joined: Sep 2017
Posts: 12,165
Likes: 4,898
From: England
The Custom I thought already had quite a high riser.
The only way I see that working is requiring longer bolts to take care of the height of the additional rise. Is that a good idea? IDK.
The only way I see that working is requiring longer bolts to take care of the height of the additional rise. Is that a good idea? IDK.
Tourer
Joined: Nov 2018
Posts: 490
Likes: 119
From: New Brunswick, Canada
Are you asking about spacers for under the risers or taller risers that can be used with the top clamp/speedo mount?
Seasoned HDF Member
Joined: Sep 2017
Posts: 12,165
Likes: 4,898
From: England
They would work if the OP wants to extend at the top of the current riser. I think some form of clarification is required.
The top yoke is flat bottomed so they wouldn't work below the current riser.
The top yoke is flat bottomed so they wouldn't work below the current riser.
Road Warrior
Joined: May 2017
Posts: 1,959
Likes: 1,574
From: Scottish Highlands.
Yes, the riser extensions sit on the top of the stock risers, they are inverted in the photos as the won't sit on the rounded part to be photographed.
Trending Topics
Thread Starter
|
Cruiser
Joined: Jul 2022
Posts: 101
Likes: 33
From: Obrien, FL
I want to use the stock riser but would like it to be 2" higher. I thank all who have replied.
Any chance you could post a link to those on ebay RRR, I looked and there are hundreds.
Any chance you could post a link to those on ebay RRR, I looked and there are hundreds.
Last edited by inspecto; Mar 25, 2023 at 01:59 PM.
Road Warrior
Joined: May 2017
Posts: 1,959
Likes: 1,574
From: Scottish Highlands.
Best Regards,
Rab.
Tourer
Joined: Nov 2018
Posts: 490
Likes: 119
From: New Brunswick, Canada
style risers off eBay and cut the bottom 2" and add it under yours.