07 XL1200 T-Bar Conversion? HELP!!
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 7
Likes: 0
From:
07 XL1200 T-Bar Conversion? HELP!!
Hey guys, I need help! I have an 07 XL1200 LOW. I am trying to put buffalo 8" pullback t-bars on it while still utilizing the stock speedo and maybe the indicator lights if that is possible... So far, I have sent back a few parts that were supposed to work but did not work out.. Any ideas would be welcome!
QUESTIONS:
1.Can the stock speedo on the 07 be switched into the older chromebracket thats in the HD catalog?
2.Can the 07 Speedo fit into the Drag Specialties 1 1/4 inch tee bar guage mount? Would I have to get a new Speedo CUP to house the actual unit in the new guage mount?
3. What options do i have for indicator lights if any?
I attached a pic of the stock setup..
Thanks alot!
Eric D
[IMG]local://upfiles/42352/745C70F107064D39B533BFB96A821826.jpg[/IMG]
QUESTIONS:
1.Can the stock speedo on the 07 be switched into the older chromebracket thats in the HD catalog?
2.Can the 07 Speedo fit into the Drag Specialties 1 1/4 inch tee bar guage mount? Would I have to get a new Speedo CUP to house the actual unit in the new guage mount?
3. What options do i have for indicator lights if any?
I attached a pic of the stock setup..
Thanks alot!
Eric D
[IMG]local://upfiles/42352/745C70F107064D39B533BFB96A821826.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
ericd
Frame/Suspension/Front End/Brakes
1
Nov 13, 2007 07:43 PM
