07 SB speedo removal help!
Thread Starter
|
Road Captain
Joined: Oct 2007
Posts: 554
Likes: 4
From: Canada
07 SB speedo removal help!
After seeing the many who have chromed the dash on the SB, I decided to get it done, the problem I have is, I have the dash off , indicator lights out, have taken out the two screws that are on the back of the speedo out and it will not move! Am I missing something? This thing wont move at all . Any advice would help, I really dont want to break anything. Thanks.
there should be two screws that hold in the bucket and 2 that hold the speedo in (if i recall correctly) the speedo comes out thought he front, just making sure your are not pulling it the wrong way
Tourer
Joined: Mar 2007
Posts: 311
Likes: 1
From: Seattle, WA
I've taken the speedo out of my Bob several times. Can you post a close-up pick of the current situation? Front and back.
I'm sure it's something simple, but a picture will speak a 1,000 words as the saying goes.
I'm sure it's something simple, but a picture will speak a 1,000 words as the saying goes.
Thread
Thread Starter
Forum
Replies
Last Post
