Bike wont start!!!!
Thread Starter
|
Advanced
Joined: Feb 2007
Posts: 59
Likes: 0
From: San Diego
Bike wont start!!!!
I was tinkering with the bike and was relocating all the wires under the tank. \\;\\\\\\; Well now the bike wont start. \\;\\\\\\; I unplugged the speedo and the front turn signals but I know that wasnt the issue cause I backed the bike up in the garage and had it started. \\;\\\\\\; So my question is why wont the bike start now. \\;\\\\\\; It turns over but wont fire up. \\;\\\\\\;Any info would be appreciated. \\;\\\\\\; And \\;the bike is a 2007 1200 N
 \\;\\\\\\;
Thanks, Mike.....
 \\;\\\\\\;
Thanks, Mike.....
Elite HDF Member
Joined: Mar 2008
Posts: 4,196
Likes: 1
From: Reno, Nevada
RE: Bike wont start!!!!
Sounds as though your wiring is the problem. I would look at all of the wiring your worked with and see if any of the pins in the connectors have dislodged themselves. Look carefully in each connector you might have disconnected. Let me know if you find the problem or need more help.
Road Master
Joined: Mar 2008
Posts: 1,209
Likes: 5
From: Michigan
RE: Bike wont start!!!!
Does it have the  \\;security system. \\; If it does, take the fob and walk at least 25 feet away for 5 min. \\; This will let the system reset. \\; Then come back to the bike and retry it. \\; Saw this happen a few weeks ago
Thread
Thread Starter
Forum
Replies
Last Post
NomadUC
Ignition/Tuner/ECM/Fuel Injection
20
Mar 10, 2015 03:32 PM
