Vance & Hines Install Help

Reply Subscribe

Thread Tools

Search this Thread

Jul 15, 2008 | 11:59 AM

creekhed1

Thread Starter

Road Master

Joined: Jul 2008

Posts: 890

Likes: 0

From:

Vance & Hines Install Help

I'm about to install Short Shots...should be here momentarily...
Stock pipes removed...ready for the new pipes...
Any trouble areas?
Do I install stock O2 Sensors?
Any helpful hints appreciated!!!

Jul 15, 2008 | 12:19 PM

dlg1125

Cruiser

Joined: Jul 2008

Posts: 118

Likes: 0

From: Greenville NC

RE: Vance & Hines Install Help

Ya you use the stock O2 sensors, Also dont tighten your heat shields until your finished, they get in the way of the head bolts. Hope you enjoy them, I love mine!!

Jul 15, 2008 | 03:47 PM

creekhed1

Thread Starter

Road Master

Joined: Jul 2008

Posts: 890

Likes: 0

From:

RE: Vance & Hines Install Help

Got 'em on....sound INCREDIBLE!!!!!!!!!!!!

Jul 15, 2008 | 04:27 PM

Lord Bundrick

Cruiser

Joined: Jun 2008

Posts: 153

Likes: 0

RE: Vance & Hines Install Help

nothing better than WOT with the V&amp\\;H... sexy!

Jul 15, 2008 | 04:33 PM

thomasf59

Outstanding HDF Member

Joined: Oct 2006

Posts: 2,257

Likes: 1

From: Papillion Ne 68133

RE: Vance & Hines Install Help

Did the new exhaust have the bung holes welded into them for the 02 sensors? What about the cross over pipe was that elimnated with the V&amp\\;H's?

Jul 15, 2008 | 08:43 PM

wdatkinson

Advanced

Joined: Jun 2008

Posts: 69

Likes: 0

From: Noblesville, IN

RE: Vance & Hines Install Help

I installed my V&H StraightShots along with my PCIII. The PCIII comes with O2 sensor eliminators, but unfortunately the exhaust didn't come with plugs for the O2 sensor holes. I just cut off the wires flush with the O2 sensor and reinstalled them. I really would have thought they'd have sent some sort of plug. If/when I take the exhaust off again, I'll investigate a better plug, but it works for now.