Drag Bars Q?
Drag Bars Q?
i know this has prolly been asked a million times so please dont kill me. Im going to put drags on my 08 1200N im thinking of going with harley part number 56558-95, will i be able to use these with my stock riser? Im looking to leave my signals on the bars
Cruiser
Joined: Jun 2008
Posts: 102
Likes: 0
From: Granby, CT
turn signals could be an issue hitting the tank but i could be wrong with a peanut tank, Myself, I just waited til some down time came and gave it a shot and bolted them on and dealt with the cables and everything elseat that time.
Cruiser
Joined: Jul 2008
Posts: 157
Likes: 0
From: Louisiana
I have 31" drags and when the signal were on the bars it was fine. Not sure about the ones you mentioned though. Good Luck.
Trending Topics
Novice
Joined: May 2007
Posts: 22
Likes: 1
From: Elizabethtown KY
Drag Bar Conversion
I converted my 06 XL883 to drag bars but I made careful measurements and so I put on 6.5" pullback risers to try to replicate the old position of the grips as closely as possible to duplicate the old ergonomics. Didn't quite work but it was close. The throttle cables and wires all reached but the wires could stand lengthening. The turn signals do need to be relocated to the lower triple tree or fork tubes but only because they are now glaring back at me on the inside of the windshield. There's no problem of turn signal clearance with the tank. Also a 4" riser will work with this set up.
KK
KK
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Captain
Joined: Aug 2008
Posts: 636
Likes: 4
From: Illinois
i have drags on my 08 1200n and with the bars being 27" wide, with 4" pull the turn signal werent even close to being a problem. i had more of a problem with my button housings (or whatever u call them) getting close.