87 Sporty Tach not calibrated?
Thread Starter
|
1st Gear
Joined: Jun 2011
Posts: 5
Likes: 0
From: Michigan
87 Sporty Tach not calibrated?
I had recently installed a Dyna2000i Ignition system and set the rev limit to 6000 rpm. When riding the tach will show 5500 rpm at the rev limiter. ALso had a hell of a time adjusting the fast idle choke and throttle stop. My question is how do I adjust the tach?
-Shane
-Shane
Ultimate HDF Member
Joined: Mar 2008
Posts: 7,604
Likes: 38
From: Landrum, SC , elevation 986'
Is the motor modified at all or does it just have the ignition installed?
Plus are you running a dual fire or single fire ignition system?
.
Plus are you running a dual fire or single fire ignition system?
.
Last edited by xFreebirdx; Jun 22, 2011 at 08:48 AM.
Ultimate HDF Member
Joined: Mar 2008
Posts: 7,604
Likes: 38
From: Landrum, SC , elevation 986'
OK, well you don't recalibrate a tach, it just gives what it gets as far as RPM's go. So you need to double check your installation.
Here are your installation instructions to double check......
http://www.dynaonline.com/skins/down...truct/D2Ki.pdf
Here are your installation instructions to double check......
http://www.dynaonline.com/skins/down...truct/D2Ki.pdf
Thread
Thread Starter
Forum
Replies
Last Post
chris_lacey
Ignition/Tuner/ECM/Fuel Injection
0
Feb 21, 2016 09:56 AM
kewlthing
General Topics/Tech Tips
5
Feb 23, 2013 06:19 AM
