Starting problems
Thread Starter
|
Road Captain
Joined: Aug 2009
Posts: 522
Likes: 2
From: pennsylvania
2007 Sportsters are well known for having chronic moisture/corrosion problems in the fuse-block/relay area.
Remove all of the fuses and relays. Clean the contacts on the fuses and relays, and then coat the contacts with dielectric grease and reinstall. You can find the dielectric grease at any auto parts store.
.
Remove all of the fuses and relays. Clean the contacts on the fuses and relays, and then coat the contacts with dielectric grease and reinstall. You can find the dielectric grease at any auto parts store.
.
Thread Starter
|
Road Captain
Joined: Aug 2009
Posts: 522
Likes: 2
From: pennsylvania
Hi again I sent the bike to the shop , they said the antenna for the TSSM module went bad , replaced it cost me 13.50 + labor starts and runs great now not one single starting issue.
Last edited by jerryw618; Mar 5, 2013 at 07:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ghost183
Electrical/Lighting/Alarm
27
Jun 1, 2018 10:15 AM
dlrshort
Touring Models
11
May 10, 2011 02:50 PM
