No Baffles
Thread Starter
|
Advanced
Joined: Jan 2010
Posts: 63
Likes: 3
No Baffles
Is it safe to run my 2013 Custom with Vance & Hines Big Shot slip-on mufflers without baffles? I am running a set of xied's and a stock breather. I had someone say it would damage my valves. Besides loss of back pressure and torque is it ok? Any input is appreciated.
There are tons of people running with no baffles. It will not harm your bike. Most people do not like it due to the loss of torque.
What some do, is remove the baffles and put in Thunder Torque Inserts. They still preserve the sound quality that you get by removing the baffles, but also give you back your lost torque and then some.
For your case I would recommend the 118 W seen at this LINK.
Here is a Dyno chart to show you the gain that Im talking about:
What some do, is remove the baffles and put in Thunder Torque Inserts. They still preserve the sound quality that you get by removing the baffles, but also give you back your lost torque and then some.
For your case I would recommend the 118 W seen at this LINK.
Here is a Dyno chart to show you the gain that Im talking about:
__________________
www.DKCustom.com
662-252-8828 Voice
662-420-4891 Text & Voice
Support@DKCustomProducts.com
www.DKCustom.com
662-252-8828 Voice
662-420-4891 Text & Voice
Support@DKCustomProducts.com
Thread
Thread Starter
Forum
Replies
Last Post
blueridge
Dyna Glide Models
11
Feb 25, 2013 11:22 AM
Clammy
General Harley Davidson Chat
3
Jun 28, 2008 10:46 AM
