Help!
Thread Starter
|
1st Gear
Joined: Jun 2021
Posts: 5
Likes: 0
From: Pennsylvania
Help!
Can anyone help? I have a 2015 Electra Glide FLHTP. When I start my bike it will automatically go into 1 cylinder and will not go out of 1 cylinder. It was doing that off and on but when I would shut it off for a little then turn the bike back on it would be fine( out of the 1 cylinder). NOW it is staying in it and won’t go out of 1 cylinder. Can anyone help cause I’ve asked pretty much everyone I know and no one knows( including people that work at Harley)
Seasoned HDF Member
Joined: Aug 2006
Posts: 24,562
Likes: 30,918
From: Pennsylvania
Hi @bikerdustin , congratulations on your first post. However, you seem to have posted in the forum testing area and probably will not get much response. Suggest posting a hello in the welcome area and then go to the proper forum and post your issue.
Sorry cannot help with your issue but there are others who can. If you know how to pull the fault codes on your motorcycle that will help in diagnosing the problem. A factory service manual for your year and model motorcycle will also help you as there is a troubleshooting section.
Oh, and welcome to the forum.
Sorry cannot help with your issue but there are others who can. If you know how to pull the fault codes on your motorcycle that will help in diagnosing the problem. A factory service manual for your year and model motorcycle will also help you as there is a troubleshooting section.
Oh, and welcome to the forum.
Last edited by CoolBreeze3646; Jun 27, 2021 at 08:40 PM.
Seasoned HDF Member
Joined: Apr 2011
Posts: 6,186
Likes: 2,135
From: W. Texas
Say hello in the welcome area and then ask your question in this part of the forum
https://www.hdforums.com/forum/ignit...-injection-55/
WP
https://www.hdforums.com/forum/ignit...-injection-55/
WP
Thread
Thread Starter
Forum
Replies
Last Post
