new handle bars..clutch doesnt work when full right turn
Thread Starter
|
Intermediate
Joined: Mar 2011
Posts: 39
Likes: 0
From: Frederick MD
new handle bars..clutch doesnt work when full right turn
Alright so figured out my wiring dilema and took it out for a rip..when bars are turned any direction but right the clutch engage disengages fine..lock right turn and i can let go of the clutch and nothing happens..2001 elctra glide with 12 in rsd apes..the clutch line gets pushed into the fairing a little when turning right anyone have this issue and how was it resolved
Tourer
Joined: Sep 2012
Posts: 415
Likes: 1
From: Virginia Beach
I had the same problem once a long time ago after changing bars on my '01 Road Glide. Your clutch cable is adjusted too tight. When you go all the way to lock the cable is pulling tight and the clutch thinks the handle is pulled. Loosen up on your clutch cable adjustment and you will be fine.
Seasoned HDF Member
Joined: Jan 2013
Posts: 10,637
Likes: 1,246
From: Lake, Ms
2010 Limited with some stuff
Thread
Thread Starter
Forum
Replies
Last Post
arbound1223
Primary/Transmission/Driveline/Clutch
5
Aug 22, 2011 10:56 AM
