Fitment Issue
Thread Starter
|
Seasoned HDF Member
Joined: Jan 2009
Posts: 12,686
Likes: 8,291
From: Ottawa, Ontario
Fitment Issue
Moderators...Maybe I should be posting this under Electrical?
I have a 2007 Electraglide and was thinking about getting rid of the passing lamp/turn signal light bar and just going with Street Glide turn signals with the single headlamp.
I assume the Street Glide front turn signals are a direct replacement up to 2013. I was just wondering if the 14+ were different?
Jim
I have a 2007 Electraglide and was thinking about getting rid of the passing lamp/turn signal light bar and just going with Street Glide turn signals with the single headlamp.
I assume the Street Glide front turn signals are a direct replacement up to 2013. I was just wondering if the 14+ were different?
Jim
Thread Starter
|
Seasoned HDF Member
Joined: Jan 2009
Posts: 12,686
Likes: 8,291
From: Ottawa, Ontario
I guess I should have checked Ronnie's first. It looks like they are different.
Ronnie's shows 69279-06 and 69278-06 for the plates that bolt on to the side of the forks to hold the signal lights.
For Rushmore's it shows 68000036 and 37 for the left and right plates.
Jim
Ronnie's shows 69279-06 and 69278-06 for the plates that bolt on to the side of the forks to hold the signal lights.
For Rushmore's it shows 68000036 and 37 for the left and right plates.
Jim
Thread
Thread Starter
Forum
Replies
Last Post
Supernova01
Want To Buy Motorcycles/Parts/Accessories
2
Apr 24, 2008 08:36 PM
