When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OP, do you find that 23" takes away from rideability and stability?
Gotta agree with that...even with the 21" slow turns are a bit of a pain.I can only imagine what the 23" would be like..It looks great though but probably not as practical.
Very nice!!! Air ride out back I take it? If so, going front air as well?
Yes, I have the Monroe air shocks out back, and no air on the front. I really wanted to do front air but decided not to at this time, so I am running the Pickard usa -1'' drop in springs in the front that they recommend with their 6 degree trees. They ride very nicely too!
Last edited by northeimcustom; Apr 28, 2016 at 12:39 PM.
Gotta agree with that...even with the 21" slow turns are a bit of a pain.I can only imagine what the 23" would be like..It looks great though but probably not as practical.
I ran a 21'' with -2'' lowered in the front with monotubes and no noticeable difference in slow maneuvers.
I only have about 25 miles on it with the 23'' (and 6 degree trees and -1'' lowering springs) the front gets kicked out about 2''. I first have noticed a very slight heavier feeling in super slow turning, but that has now went away and it feels very normal at this point. So overall, not much of a difference.
I ran a 21'' with -2'' lowered in the front with monotubes and no noticeable difference in slow maneuvers.
I only have about 25 miles on it with the 23'' (and 6 degree trees and -1'' lowering springs) the front gets kicked out about 2''. I first have noticed a very slight heavier feeling in super slow turning, but that has now went away and it feels very normal at this point. So overall, not much of a difference.
I'm glad that its working out for you. As everyone stated, you have a beautiful bike. Its clear that you put a lot of detailed work into it.
I asked the question because a riding buddy also did the 23" and hated it because of it changing his rideability. Here in the Carolinas, we do a lot of narrow back road riding, along with rides through the mountains. While we haven't been to the mountains since he made the change, I noticed that he was not riding well on the back roads. His looks great with that 23" but its now more like a show bike instead of riding bike.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.