Front Cow Bell / Fork question

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2017 | 08:59 PM

Schmidt0221

Thread Starter

Advanced

Joined: May 2017

Posts: 61

Likes: 20

From: Grand Haven, MI

Front Cow Bell / Fork question

hey everyone,

I have a service manual, and I removed the lower forks so I could get the cow bells off for powder coat.

Would the lower forks be able to powder coat together the way they are, or would the tubes have to be removed and all broke down?

Last edited by Schmidt0221; Jun 18, 2017 at 09:05 PM.

Jun 18, 2017 | 10:01 PM

NorCalFBLO

Road Master

Joined: Feb 2011

Posts: 992

Likes: 20

From: Arizona

Quote:

Originally Posted by Schmidt0221

you have to disassemble the forks. The Manuel has great instructions and also lots of video's on YouTube.. Powder coated forks look great!

Jun 18, 2017 | 10:06 PM

Iceman24

Seasoned HDF Member

Joined: Sep 2009

Posts: 25,307

Likes: 2,443

From: Eastern NE

^^^Yep^^^

You can't coat the entire upper/lower forks as one unit...must disassemble.

Also, if you didn't want to wait for coating, I have a set FS in the Touring Parts section.

Jun 18, 2017 | 10:25 PM

Schmidt0221

Thread Starter

Advanced

Joined: May 2017

Posts: 61

Likes: 20

From: Grand Haven, MI

Quote:

Originally Posted by Iceman24

^^^Yep^^^

You can't coat the entire upper/lower forks as one unit...must disassemble.

Also, if you didn't want to wait for coating, I have a set FS in the Touring Parts section.

iceman are your forks ready to be bolted right up, or do they need the internals and be assembled ?