Relocate Passenger Intercom Plug on Ultra?
Thread Starter
|
Tourer
Joined: Jul 2006
Posts: 403
Likes: 0
From: Antioch, CA
Relocate Passenger Intercom Plug on Ultra?
Has anyone relocated the passenger intercom plug from the bottom of the speaker housing to the top to put less strain on the coiled cord? It seems there is enough length on the harness on the bike. Protecting the finish on the tour pack has to be figured out though.
Cruiser
Joined: Jan 2007
Posts: 237
Likes: 2
From: Newbury Park, CA
RE: Relocate Passenger Intercom Plug on Ultra?
Haven't relocated the plug; But read a post here that to slove the problem of the cord continually pulling out of the receptacle, use a hair dryer to soften teh coiled cord, then stretch it to the desired length by securing it at the length you want. In other words, hang a weight on one end to stretch it out while heating with a dryer.
Of course, the other option would be to secure the ends with a rubber band or zip-tie to prevent them from coming apart.
Of course, the other option would be to secure the ends with a rubber band or zip-tie to prevent them from coming apart.
Cruiser
Joined: Dec 2005
Posts: 129
Likes: 0
From:
RE: Relocate Passenger Intercom Plug on Ultra?
Had same problem, cured it by applying a slight smear of silicon glue round the plug before plugging into helmet. Still allows easy removal if required but keeps plug in place for normal day to day driving
Thread
Thread Starter
Forum
Replies
Last Post
