2002 RK Accessory Plug?
Thread Starter
|
Advanced
Joined: Oct 2013
Posts: 60
Likes: 1
From: Wisconsin
2002 RK Accessory Plug?
My new-2-me RK Classic needs a phone charger. Easy enough. In the process I came across the Accessory position in the ignition switch and wondered, "Where does this terminate?". The shop manual makes a vague reference to a port under the seat.
I don't see anything there. I do see a spot for what could be a relay, but nothing else.
How do you access the Accessory feature? Maybe directly through the fuse bic?
Thanks
I don't see anything there. I do see a spot for what could be a relay, but nothing else.
How do you access the Accessory feature? Maybe directly through the fuse bic?
Thanks
Outstanding HDF Member
Joined: May 2015
Posts: 2,172
Likes: 377
From: Georgia
Not sure exactly on an 02 as HD tended tomove the plug around a bit. On my 07 Ultra Classic the accessory plug is under the seat in fromt of the battery,. The accessory plug itself is a 4 pin female plug that has 12v unswitched, 12v switched, brake light power and a ground. Very nearby is a seperate, single female plug that provides B+ 12v power.
But, again, not sure where you can find it on your bike but the most common places are under the seat or under side coveres or possibly in the nacelle on an RK.
But, again, not sure where you can find it on your bike but the most common places are under the seat or under side coveres or possibly in the nacelle on an RK.
Last edited by ORradtech; Sep 16, 2018 at 09:08 AM.
Road Warrior
Joined: Jul 2006
Posts: 1,302
Likes: 61
From: Near YVR
https://serviceinfo.harley-davidson....7?locale=en_US
This is for an auxiliary port port and is for reference only an optional type of external power point.
Scroll down to step 7 in the instructions and read from there.
You will need to splice into the wiring or buy this https://serviceinfo.harley-davidson....8?locale=en_US and those are the instructions.
Or you can run straight to your battery, but then you need an inline fuse.
I may have confused you and that is not my intention or I dont understand what you are trying to install.
But, I think I do
Rob
This is for an auxiliary port port and is for reference only an optional type of external power point.
Scroll down to step 7 in the instructions and read from there.
You will need to splice into the wiring or buy this https://serviceinfo.harley-davidson....8?locale=en_US and those are the instructions.
Or you can run straight to your battery, but then you need an inline fuse.
I may have confused you and that is not my intention or I dont understand what you are trying to install.
But, I think I do
Rob
Tourer
Joined: Jan 2018
Posts: 319
Likes: 139
From: Seattle
Bike have a connector for a battery tender? If so, this might be the most economical
Thread
Thread Starter
Forum
Replies
Last Post
