Looking for a crossover pipe
Thread Starter
|
Advanced
Joined: Feb 2019
Posts: 60
Likes: 21
From: Tennessee
Looking for a crossover pipe
Good morning everyone!
Hope everyone's riding has been fantastic so far this season! Last Sunday I went on a charity ride with one of the local MC's in the area and about 15 minutes from home my bike started vibrating really bad and sounded like sh**. Got her home and upon inspection found my crossover pipe had a crack in it. Removed the exhaust and found that it was about 70% cracked all the way around. So first thought was front engine mount. Well, there was the culprit. I replaced the mount and had a local welder take a look at it and he was able to repair it. I would still like to get one that hasn't been welded on. So, I was wondering if anyone had one that they would like to part with. I have a 96 FLHPI with an 80 EVO. Thanks everyone and keep her rubber side down!
-Nate
Hope everyone's riding has been fantastic so far this season! Last Sunday I went on a charity ride with one of the local MC's in the area and about 15 minutes from home my bike started vibrating really bad and sounded like sh**. Got her home and upon inspection found my crossover pipe had a crack in it. Removed the exhaust and found that it was about 70% cracked all the way around. So first thought was front engine mount. Well, there was the culprit. I replaced the mount and had a local welder take a look at it and he was able to repair it. I would still like to get one that hasn't been welded on. So, I was wondering if anyone had one that they would like to part with. I have a 96 FLHPI with an 80 EVO. Thanks everyone and keep her rubber side down!
-Nate
Get it spray welded - it will never brake again. Don't waste time with a wire welder. If you decide to buy an 08 pipe get the shields because the shield clamps on your bike may hit the O2 bungs.
Last edited by Ed Ramberger; Sep 22, 2019 at 07:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
