I put a detachable tourpak setup on my Ultra. I want the saddlebag lights to strobe when I hit the brakes. I e-mailed CD about my setup but their answer was still a little cloudy.
Anyone add this module with a detachable tourpak and if so which one.

 

I don't have SB lights but I have a Magic Strobe from CD. By choice all my rear lights strobe when I hit the brake. I have a brake/run/turn set up.
I also have a TP that I set up with bright LED (non CD) and they strobe the same way when connected.

 

Good Afternoon!

To clarify - in order to flash/strobe the H-D LED Saddlebag Lights on a 2019 Ultra, you'll use our MAGIC-STROBES-RSG. You can find that module, here: https://www.customdynamics.com/magic...touring?cat=61

Please let us know if you have any other questions!

 

I just did this and posted it in my thread here: https://www.hdforums.com/forum/milwa...l#post18574450

You just need to have it plugged into the correct place.
Standard setup: Bike's harness --> Rear Fender Harness
With Saddlebag Lights: Bike's harness --> Saddlebag Lights --> Rear Fender Harness
With saddlebag lights and magic strobe (if you want the saddlebag lights to flash): Bike's harness --> Magic Strobe module --> Saddlebag Lights --> Rear Fender Harness
With saddlebag lights and magic strobe (if you DON'T want the saddlebag lights to flash): Bike's harness --> Saddlebag Lights --> Magic Strobe module --> Rear Fender Harness

Here's all lights strobing with theMAGIC-STROBES-RSG: