14 Ultra Ignition Start sequence problem
Thread Starter
|
Stage II
Joined: Jul 2020
Posts: 2
Likes: 0
From: Central Queensland
14 Ultra Ignition Start sequence problem
Hey Team, I have a DIY fail, if anyone can help with some pointers before I send to the HD Dealer.
I have just changed out the standard bars for the Mini-apes,all went well until reassemble and the ignition tumbler wound not line up.
Watched a UTube got the tumbler ( ignition switch) lined up and feels correct.
Turn it to ignition position and only the the headlight comes on along with a small start solenoid sound at the front but no display or
other switches work or the start sequence ??.
Could be just and electrical connecter loose but seems like it would /could be a HD switch/activation fault.OR is the ignition switch not lined up correctly ?
Any ideas for a fellow DIYer
I have just changed out the standard bars for the Mini-apes,all went well until reassemble and the ignition tumbler wound not line up.
Watched a UTube got the tumbler ( ignition switch) lined up and feels correct.
Turn it to ignition position and only the the headlight comes on along with a small start solenoid sound at the front but no display or
other switches work or the start sequence ??.
Could be just and electrical connecter loose but seems like it would /could be a HD switch/activation fault.OR is the ignition switch not lined up correctly ?
Any ideas for a fellow DIYer
Thread
Thread Starter
Forum
Replies
Last Post
