Tour Pak lighting
Thread Starter
|
Novice
Joined: Nov 2019
Posts: 16
Likes: 1
From: Marysville, Wa
Tour Pak lighting
Well I searched the forums and couldn’t find what I was looking for. I have a 2017 SGS which I just added a tour pak with no lighting from DC Color Factory. I currently have the Ciro3d blade lights and the lights that attach to the bottom of the saddlebags. My question is, since I already have a. Y harness connected to my factory harness, how will I go about installing the tour pak tail lights (looking at the Letric lighting tour pack led kit and the letric lighting tour pack side marker lights). Can I use another Y harness? I’m looking at this for the side markers Custom Dynamics Tour-Pak Side Marker Run Brake Turn Signal Module as well. If this has been beaten to death previously, I apologize for asking it again and I just didn’t find my answer. Thank you in advance.
Seasoned HDF Member
Joined: Sep 2020
Posts: 8,108
Likes: 9,501
From: central NC
Custom Dynamics will tell you exactly which harness/es you need. I just put a Harley tail light from a king tour pak on a chopped tour pack on a Street Glide. I already had additional Harley LED run/turn/brake added to my hard bags. I also run a CD Magic Strobe
Just tell CD what you already have and they’ll tell you what you need.
Just tell CD what you already have and they’ll tell you what you need.
Thread
Thread Starter
Forum
Replies
Last Post
jay87LX
Touring Models
22
May 21, 2013 06:31 PM
