When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installing new handlebars & control cables on my bike and trying to decide between stainless steel & the new diamond back control cables. Would like to hear from some of you that have these cables and your opinions on them.
I really like the looks of the Diamondbacks, but the plastic sheath over the braided stainless is quite fragile and is easily damaged during installation and use. You'll want to be extra careful during the routing of them during installation. But they sure look nice, and after having them on my bike for over a year they still looked bright and clean.
On the Harley Davidson parts web site the Diamondback cable is defined as a micro fine wire that is braided into the cable, but it didn't say anything about stainless. Check out the web site write up http://www.harley-davidson.com/gma/g...bmLocale=en_US
I would only use Barnett Platinums if you like the Diamond Back look. Barnett makes very durable cables. Just take it easy when you install any brand of cables. HD cables tend to have a soft protective case IMO.
I have had the diamond backs on my bike for 3 years now still look good. The other brands seem to be more of a gray color compared to the diamond backs. You do have to be careful with the clear covering but other than that no complaints.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.