which belt?
Thread Starter
|
Novice
Joined: Oct 2007
Posts: 15
Likes: 0
From:
which belt?
OK, I need some help from the mechmos! I'm looking at changing the front and rear drive pulleys and need some help on what size belt to replace the 139T with. I'll be installin a 34T front and 65T rear pulley and am not sure if need to use a 135 or 136T belt. These are going on a 99 FLHPI with the stock 5 speed. Figured to try going this way first before thinking about the 6 speed. I do a lot ( about 700 miles a week) of distance driving and not much around town. Looking for longer legs and lower RPMs. Any and all advice is appriciated.
Roadtrash
Roadtrash
Tourer
Joined: Jun 2007
Posts: 444
Likes: 0
RE: which belt?
that swap might be able to use the 139T belt orjust find a 61T pully of a softtail and use the 135T belt that pully requires a 4T shorter belt i have done that same swap changing the rear pully to the 61T and 132T belt from the 70T pully and the 136T belt on a earlier bagger, 9T pully drop only required a 4T shorter belt, good luck..............
Thread
Thread Starter
Forum
Replies
Last Post
kiwiharleyrider54
Primary/Transmission/Driveline/Clutch
17
Oct 16, 2022 05:07 PM
bgtexas
Primary/Transmission/Driveline/Clutch
7
Sep 10, 2013 10:56 PM
