When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've read all the threads about the various after market center stands. I'd like to get one, but a problem I can see is, once the center stand is installed into the "bowtie channel" under the frame, you won't be able to use a floor lift jack. I use the Sears red jack. I had to remove the rubber piece on the rear arm of the jack and put a piece of narrower plywood in it's place in order for the arm to slip into the bowtieso the jack lifts the bike level and securely. With the center stand bolted in there the jack won't slide in. Any experiences with this?
It's not that hard to take the center stand off when you need to use the lift. It takes maybe 10 minutes to pull the center stand. The benefits of a center stand far out weight the negatives.
ORIGINAL: bigdaddy11311
I have a vwowv centerstand on my Road King Custom and have NO problem getting my Sears Yellow jack underneath and raise the bike with the stand there
I have a sears red lift,no problems with the Harley center stand.
I have a center stand, no problem with the lift. Put the bike on the center stand, slide the jack under the bike so just the edge of the jack catches the front of the "bowtie" and jack her on up. Seems to real balanced in that position too.
Would it throw the bike off balance on thelift if you put the bike on the center stand and then slipped the lift-jack under it straddeling the center stand?
I would think this is preferential to having the bike on the side stand and lifting it with the center stand up.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.