150 rear tire ??
Advanced
Joined: Mar 2008
Posts: 66
Likes: 0
From:
RE: 150 rear tire ??
ORIGINAL: uweldit
Elvis, you don't want any rubbing. Before you quit on the 150 Avon, try it with the new inch 18wheel. Tire will be lower profile.
Check the engine/frame/rear swingarm alignment and verify its within spec. If seriously out-of-line it will cause rubbing too.
Elvis, you don't want any rubbing. Before you quit on the 150 Avon, try it with the new inch 18wheel. Tire will be lower profile.
Check the engine/frame/rear swingarm alignment and verify its within spec. If seriously out-of-line it will cause rubbing too.
Thanks
Advanced
Joined: Dec 2007
Posts: 60
Likes: 0
From:
RE: 150 rear tire ??
I just had a new set of wheels put on my 07 Roadking. A New 18"Fat Daddy 50 spoke wheel
in front with a Dunlop Elite 3- 130/70/18 tire. On the rear is a 16" RC Components chrome Smoothie with a Dunlop Elite 3 - 160/80/16
I had it done @ The Wheel Shop in Phoenix, AZ. I am not sure what if any spacers were used
but it looks and handlesgreat
in front with a Dunlop Elite 3- 130/70/18 tire. On the rear is a 16" RC Components chrome Smoothie with a Dunlop Elite 3 - 160/80/16
I had it done @ The Wheel Shop in Phoenix, AZ. I am not sure what if any spacers were used
but it looks and handlesgreat
Advanced
Joined: Mar 2008
Posts: 66
Likes: 0
From:
RE: 150 rear tire ??
i would think a 160 could be possible. I think the belt would clear with the spacer, but i think you may run into the tire rubbing on the fender. Not 100% sure though.
Also, here is the finished product [sm=bling.gif]
Also, here is the finished product [sm=bling.gif]
Thread
Thread Starter
Forum
Replies
Last Post
ricopaces
General Harley Davidson Chat
2
Nov 29, 2009 11:07 PM
