early style efi on roadglide
Thread Starter
|
Intermediate
Joined: Apr 2007
Posts: 49
Likes: 0
From:
early style efi on roadglide
i am looking at a 2001 roadglide w/a bigbore kit 95 inch. the efi is an early style m.m. does any one have one of these and if you do have you had any trouble with it? should i wait and get a delco efi?
Seasoned HDF Member
Joined: Dec 2005
Posts: 5,462
Likes: 619
RE: early style efi on roadglide
I had a '99 RKC with a mild 95" kit that used the M&M system. It worked fine for me. They are a good system, but the Delphi TB is better. If the only thing you are concerned about is the M&M TB, the bike runs good, and you don't have major engine build plans, I wouldn't worry about it. If a radical engine build is in your plans, you may want to find a Delphi equipped bike.
Just my opinion
Zach
Just my opinion
Zach
Road Master
Joined: Jul 2007
Posts: 769
Likes: 8
From: Brooksdale, ON
RE: early style efi on roadglide
One thing I remeber from the dealership about MM systems, they like the biger aircleaners from somebody like zippers and the computers will eventually on some of them start to leak and let water inside shorting out the wireing to the fuel pump and requiring replacement of the ECM. We had a few do this, now these tings only went bad when they were wet so some of them we opened up and resealed with silicone and they were fine short term until the new ECM came in and they are about $1000.
Thread
Thread Starter
Forum
Replies
Last Post
