LED stop/tail/turn

Reply Subscribe

Thread Tools

Search this Thread

Apr 29, 2008 | 10:01 PM

K.J.

Thread Starter

6th Gear

Joined: Mar 2008

Posts: 13

Likes: 0

LED stop/tail/turn

hello all im trying to wire LED s/t.t lights into bags but cant seem to get brake /turn to work right any help out there?thanks

Apr 30, 2008 | 06:44 AM

TexasRedneck

Elite HDF Member

Joined: Oct 2006

Posts: 3,945

Likes: 1

From:

RE: LED stop/tail/turn

Yer probably wonderin' why no one is tryin' ta answer ya. Wahl, it's likely 'cuz no one has quite figured out jest what yer question is...what kinda LED light kit? Made by whom?

Apr 30, 2008 | 11:40 AM

tgaetto

Road Master

Joined: Jul 2006

Posts: 1,229

Likes: 20

From: Illinois

RE: LED stop/tail/turn

Kind of like how your sentences read[&:]... Just my opinion

Apr 30, 2008 | 11:44 AM

TexasRedneck

Elite HDF Member

Joined: Oct 2006

Posts: 3,945

Likes: 1

From:

RE: LED stop/tail/turn

Yeppirs - it's ta keep you yankees from stealin' our superior knowledge an' good looks....

jest sayin'....

Apr 30, 2008 | 05:37 PM

Harleypingman

Extreme HDF Member

Joined: Apr 2006

Posts: 10,449

Likes: 46

From: Roswell, GA

RE: LED stop/tail/turn

KJ: Have NO IDEA what product you are using; whether it uses a load equalizer or not; and, etc.

The normal HD wiring is: black wire= ground; red with yellow stripe= brake; and, blue= run light.

Good luck with your project.

May 1, 2008 | 09:38 PM

K.J.

Thread Starter

6th Gear

Joined: Mar 2008

Posts: 13

Likes: 0

RE: LED stop/tail/turn

thanks guys but i figured it out.i installed led lights in lowerr bag extensions because i removed all others when i installed bad dad rear fender.these lights were not a kit they are teardrop shaped led for a trailer.found i needed a badlanders illuminater 3.they work band look awesome!

May 1, 2008 | 11:33 PM

monte64

Cruiser

Joined: Nov 2006

Posts: 105

Likes: 0

From: Rockford, IL

RE: LED stop/tail/turn

K.J. I just did this with my bags. I ordered the badlanders wiring harness from Bad Dad. What I did was splice into the (blue) run wire and bought new connectors from NAPA which were 4 wire instead of 3, which the badlanders harness is. My rear lights are LED's from Shiny-Hiney.com. 1930 tear drop LED's. They are 4 wire lights and come with a built in 3 pulse flash for brake. Look great and are bright, a little pricey but look good. If you don't want a 3 pulse brake flash, you can ground the wire for it and you have normal brake, run and turn function. If you need help just email me.