When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey Moe get well man, we have some miles to do. Thanks XXX, Race-Tech w/gold emulators lowering kitinstalled 1". Ride did not change noticeable nor the handling. A few goodies added since last post.A few pictures added.
Thanks also to all for answering questions for upgrades.
Would you buy the 1 inch lowered springs again? I am curious because I have a 21/18 setup and I currently have the SG (-1") rear shocks and have done nothing to my front suspension.
I feel like the bike is a little floppy in the front wheel and the bike also feels a little light up front now and I am sure adding more weight bias to the front via the lowering springs (either through Progressive/HD or RaceTech) will help, but you said the handling difference is not appreciable.
So that begs the question. Would you spend the loot again to do get the lowering springs setup?
I haven't done it yet, but have seriously considered both the RaceTechand the Progressive/HDsetups.
In addition, there are both -1" and -2" front spring setups from RaceTech. Which is the correct drop for the 21" and -1" rear shocks, does anyone know?
I waited about month and half after purchase of he kit,before installation. I truly did not want to disturb the ride as it is so comfortable. I PM back and forth with acouple forum guys , more so with GliderXXX, and he gave me some solid information as the performance and handling with the same race-tech set-up. I also am only 5'8' and was almost on my tores at traffic lights,so lowering was also a plus because now I am flatfooted. The bike actually performs extremley well . Only if you dive into the front brake , you might feel it bottom,but you have to hit it hard (front brake) , I have ABS . I just tested as I was told about what might happen ,so it wasn't like a true emergency. I originally was set to send it back sor fear of messing with the factory suspension up front. Glad I didn't and YES, I would do it again
ORIGINAL: SloChicken
Would you buy the 1 inch lowered springs again? I am curious because I have a 21/18 setup and I currently have the SG (-1") rear shocks and have done nothing to my front suspension.
I feel like the bike is a little floppy in the front wheel and the bike also feels a little light up front now and I am sure adding more weight bias to the front via the lowering springs (either through Progressive/HD or RaceTech) will help, but you said the handling difference is not appreciable.
So that begs the question. Would you spend the loot again to do get the lowering springs setup?
I haven't done it yet, but have seriously considered both the RaceTechand the Progressive/HDsetups.
In addition, there are both -1" and -2" front spring setups from RaceTech. Which is the correct drop for the 21" and -1" rear shocks, does anyone know?
Hey Moe get well man, we have some miles to do. Thanks XXX, Race-Tech w/gold emulators lowering kitinstalled 1". Ride did not change noticeable nor the handling. A few goodies added since last post.A few pictures added.
Thanks also to all for answering questions for upgrades.
Looks good. I knew you would like the Race Tech kit. I think what you were saying to those who might be interested is that WITH the Race Tech kit, the ride and handling did not worsen by adding the 21" setup...right? I think we agree the reason is due to the lowering and the Race Tech kit. I am pretty spoiled now with the system. I really love the way the bike handles with the dual cartridges. It's a very strong athletic feel on the bike with the Race Tech. I doubt I would have swapped out what I believe to be a very good front end suspension on the newer stock Harleys with the single cartridge system if I weren't lowering the bike or putting on the 21's, but I believe it's a must for those who do. Your bike looks great btw.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.