DYNO Numbers for Baggers???
#21
#23
Join Date: Feb 2005
Location: Twin Cities Minnesota
Posts: 3,986
Received 6,824 Likes
on
1,090 Posts
RE: DYNO Numbers for Baggers???
96 h.p.
96 torque
2005 FLHTI
With S.E. Slip on mufflers and 95" flat tops, S.E.air cleaner, 12.9 a/f ratio with S.E.Race Tuner, Andrews 31G cam, .030 Cometic gaskets, S.E. out of the box stock Performance heads. Will be re-dynoing with the new air cleaner and Super Trapps soon.
96 torque
2005 FLHTI
With S.E. Slip on mufflers and 95" flat tops, S.E.air cleaner, 12.9 a/f ratio with S.E.Race Tuner, Andrews 31G cam, .030 Cometic gaskets, S.E. out of the box stock Performance heads. Will be re-dynoing with the new air cleaner and Super Trapps soon.
#24
RE: DYNO Numbers for Baggers???
Usually RPM's are shown across the bottom and the HP/Torque values are shown along the left side. Just follow the line on the chart. The HP and TQ lines are generally different colors. Some graphs show the Air:Fuel (AFR) ratio on the very bottom. The number along the left side of that graph represent the number of air particles to every one particle of fuel.
It would be opening a can of worms to gice an opinion on how the lines for each value should be shaped, but generally the more "area" under each line the better. The exception being the AFR line. This would ideally be as flat as possible somewhere around 13:1 I've been told.
Clear as mud? I'm sure there are others that can explain it better.
BZ
It would be opening a can of worms to gice an opinion on how the lines for each value should be shaped, but generally the more "area" under each line the better. The exception being the AFR line. This would ideally be as flat as possible somewhere around 13:1 I've been told.
Clear as mud? I'm sure there are others that can explain it better.
BZ
#28
RE: DYNO Numbers for Baggers???
01' Ultra, 95" Stage II w/ SE heads & pistons and pro pipes. I too do not know which cams I have, but I'm sure about the high comp pistons.
Dynoed at Rod's Performance 93.8 HP 96.5 tq
I will be adding V&H true dual head pipes and Cycle Shack mufflers in a few weeks. It will be dynoed again to tweak for the changes. I may picked up a bit more power!
Dynoed at Rod's Performance 93.8 HP 96.5 tq
I will be adding V&H true dual head pipes and Cycle Shack mufflers in a few weeks. It will be dynoed again to tweak for the changes. I may picked up a bit more power!