DYNO Numbers for Baggers???
Advanced
Joined: Nov 2006
Posts: 70
Likes: 1
From:
RE: DYNO Numbers for Baggers???
75.9 Hp 90.4Tq with B&E 1.75 mufflers, K&N 2 1/8" ac and 103" download at TNT performance dyno in Nashville. It ran a little rich past 4000 but not enough to be worth going to a SERT or PC.
Elite HDF Member
Joined: Mar 2006
Posts: 4,722
Likes: 5
From: Biddeford, Maine
RE: DYNO Numbers for Baggers???
ORIGINAL: harris48cars
New numbers. 95" Andrews 26G cams with gear drive. SERT dyno tune.
84HP 103TQ.
New numbers. 95" Andrews 26G cams with gear drive. SERT dyno tune.
84HP 103TQ.
ORIGINAL: harris48cars
RKC, 67.5 HP and 81 TQ. Stage 1 with V&H true duals.
Gary
RKC, 67.5 HP and 81 TQ. Stage 1 with V&H true duals.
Gary
5th Gear
Joined: Apr 2006
Posts: 9
Likes: 0
From:
RE: DYNO Numbers for Baggers???
I was lucky enough to buy my 06 Road King Classic with a bad set of fuel injectors. Last March while I was riding in Daytona with my brand new sputtering RK (which became downright dangerous) feeling really bad that I traded my 04 Dyna Low Rider, I visited the H-Dtest ride area to discuss my situation with the techs. Oneof the techs happened to be an engineer from the performance division. He offered me his card and some insight on the fuel injection problem.Over the course of the next few weeks we had many discussions aboutwhat options were available to help the performance of my bike. In the endwe installed the followingwith a dyno tuning run (No charge) that resulted ina great performing bike that gets around 48 MPG.
25 degree fuel injectors (finally) Replaced free my the Motor Company
SE 2 Slip-ons (Purchased by me)
Stage 1 (Purchased by me)
SE Race Tuner(Purchased by meless 20%)
74.53HP with 75.4 Torque
Great performance for under $1000.00
[IMG]local://upfiles/10224/CCF7473648BA4FCCB9C3B64068253E5D.jpg[/IMG]
25 degree fuel injectors (finally) Replaced free my the Motor Company
SE 2 Slip-ons (Purchased by me)
Stage 1 (Purchased by me)
SE Race Tuner(Purchased by meless 20%)
74.53HP with 75.4 Torque
Great performance for under $1000.00
[IMG]local://upfiles/10224/CCF7473648BA4FCCB9C3B64068253E5D.jpg[/IMG]
Tourer
Joined: May 2005
Posts: 458
Likes: 0
From: N.J. !!!!!
RE: DYNO Numbers for Baggers???
Interesting question, looking for opinions.
Go to nightrider.com and see data fromFall 2006 Enthusiest showing that baggers make much better torque numbers than Dynas. Reason is the crossover pipe & large muffler volume / backpressure. In principal that does make sense to me.
So, they say HD claims an 07 Bagger gets 71 HP / 90 Tq. at the rear wheel stock, and with Stage1 (#29773-02C) & SE Mufflers (#64985-07) they see 79 HP / 96 Tq. at the rear wheel. Of course, all falls off past 4,000 RPM's.
Overall this makes sense in theory, but if correct then MOCO has done a nice job and the Stage1 / SE Mufflers does produce results.Most people claim the Stage1 / Download is a waste, but I kinda think it deserves a closer look.
I have an 07 FLHRS on order and I just may give this a try.
Go to nightrider.com and see data fromFall 2006 Enthusiest showing that baggers make much better torque numbers than Dynas. Reason is the crossover pipe & large muffler volume / backpressure. In principal that does make sense to me.
So, they say HD claims an 07 Bagger gets 71 HP / 90 Tq. at the rear wheel stock, and with Stage1 (#29773-02C) & SE Mufflers (#64985-07) they see 79 HP / 96 Tq. at the rear wheel. Of course, all falls off past 4,000 RPM's.
Overall this makes sense in theory, but if correct then MOCO has done a nice job and the Stage1 / SE Mufflers does produce results.Most people claim the Stage1 / Download is a waste, but I kinda think it deserves a closer look.
I have an 07 FLHRS on order and I just may give this a try.
Advanced
Joined: May 2005
Posts: 70
Likes: 0
RE: DYNO Numbers for Baggers???
2003 Ultra Claasic
95"
SE Performance Heads
Forged HC Pistons
PCIII
Fueling Oil Pump
S&S 570G
SE Adjustable Pushrods
Roller Rockers
Jims Hydrosolid Lifters
D&D Quiet Fat Cat
102HP/97TQ
[IMG]local://upfiles/2486/48715CC4445F4A269C87C57871F58BC1.jpg[/IMG]
95"
SE Performance Heads
Forged HC Pistons
PCIII
Fueling Oil Pump
S&S 570G
SE Adjustable Pushrods
Roller Rockers
Jims Hydrosolid Lifters
D&D Quiet Fat Cat
102HP/97TQ
[IMG]local://upfiles/2486/48715CC4445F4A269C87C57871F58BC1.jpg[/IMG]
Cruiser
Joined: Jan 2007
Posts: 210
Likes: 0
From: Corpus Christi, Tx.
RE: DYNO Numbers for Baggers???
OK, I just joined less than an hr ago so I hope I can do this. I add the dyno sheets. One is stock the other has jets (dynojet kit), SE breather, SE Slip-ons.
Elite HDF Member
Joined: Mar 2006
Posts: 4,722
Likes: 5
From: Biddeford, Maine
RE: DYNO Numbers for Baggers???
ORIGINAL: apachethunder03
Whats SERT? I know SE is screamin eagle, but RT?
Whats SERT? I know SE is screamin eagle, but RT?
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
