New to the Road King world and would like to move handlebars back how do I remove the cover over the risers without damaging it?
It's a 1999

 

The directions are in the service manual. Which "King" is it? Standard,Custom, or Classic?

 

FLHRCI I just purchased the bike & haven't had time to hit the Harley shop for a manual, I have another post for a downloadable owners manual and shop manual no replies yet.

 

Here is a good site for Road Kings, lots of info there:
http://www.moccsplace.com/harley.htm

 

1) Unscrew headlight trim ring.

2) Remove all the little black screws around headlight, unplug and remove headlight.

3) Remove small nut under top of nacelle that holds the top chrome decorative piece that covers nacelle joint, remove strip.

4) Remove small screw, washer and nut holding the front of the handlebar cover on. (way back in the nacell, don't drop the nut and washer)

5) Remove key lock trim ring and 2 screws that hold the handle bar cover on. Remove cover.

6) Adjust handlebars and reverse process.

 

if you want diagrams ..just go to brand, bike and then section: you WILL have tp scroll to see diagrams.
http://www.bikebandit.com/harley-dav...r-1999/o/m1019

 

Thanks for all the great info!
The wealth of information on the net amazes me. Thanks again....