Clearview Recurve
Just recieved my Clearview +1, grey tint and vent for an 08 Road Glide.
 \\;
Works \\;better than stock \\;but cannot tell the Vent does anything.
 \\;
Also can not see the recurve in it.
 \\;
Set a ruler on the shield and the gap is so small it is not even measurable and you cannot see it at all without the ruler.
 \\;
Also recieved the shield in about 3 weeks. \\; When I got the shipping email I emailed John and asked why so soon when it should have been 6-8 weeks? \\; He said one must have got cancelled.
 \\;
John had always been very responsive when emailing with questions before the purchase \\;(less than 25hrs), sent an email early yesterday with the above issues and no word back?
 \\;
Anyone else have any issues.
 \\;
I will give john until early next week to email or I will call.
 \\;
Thanks
 \\;
 \\;
[IMG]local://upfiles/38632/5ACDE0C995A649848E9D80C3DF7DA3C3.jpg[/IMG]
 \\;
Works \\;better than stock \\;but cannot tell the Vent does anything.
 \\;
Also can not see the recurve in it.
 \\;
Set a ruler on the shield and the gap is so small it is not even measurable and you cannot see it at all without the ruler.
 \\;
Also recieved the shield in about 3 weeks. \\; When I got the shipping email I emailed John and asked why so soon when it should have been 6-8 weeks? \\; He said one must have got cancelled.
 \\;
John had always been very responsive when emailing with questions before the purchase \\;(less than 25hrs), sent an email early yesterday with the above issues and no word back?
 \\;
Anyone else have any issues.
 \\;
I will give john until early next week to email or I will call.
 \\;
Thanks
 \\;
 \\;
[IMG]local://upfiles/38632/5ACDE0C995A649848E9D80C3DF7DA3C3.jpg[/IMG]
I was surprised when I got my medium that the recurve was so slight. I am still very happy with the shield.
[IMG]local://upfiles/14366/55FE26CAE7594C06B1E70D77CF5BAC03.jpg[/IMG]
[IMG]local://upfiles/14366/55FE26CAE7594C06B1E70D77CF5BAC03.jpg[/IMG]
I put the XL shield on with the vent and the vent does make a difference. \\; \\; open the vent door so it is level open it all the way and the air head towards the \\;gas tank instead of you chest \\;
I was also surprised at how little recurve on my 8". \\; It still moves the air a little higher(about an inch or so) \\;than a non recurve sheild.





