Rock chip
Tourer
Joined: Sep 2007
Posts: 423
Likes: 3
From: Blountstown, FL
I had some damage on my fairing last year when my bike was new and I wanted it back right.I also wanted to make my bike a little different so while it was being repaired,I had my painter airbrush the H-D bar and shield on the front of my fairing.My total bill was around $400.00.That's alot of money but it was done right and I've been happy with it since.
Tourer
Joined: Oct 2007
Posts: 380
Likes: 0
From: canton ny
I`m not following the `03 part.One of my bikes is a`91 and I would be very upset if I got a big chip and had to touch it up. "Not too early for a paint job". Are you a RUB by any chance?Maybe he should sell it in the Pennysaver for $500 bucks since it`s so old. It`s got a carb on it like a farm tractor. Personally I would get done professionally if there were any doubt`s. Toby
Thread Starter
|
Road Master
Joined: Jun 2007
Posts: 958
Likes: 1
From: Birch Bay, WA
I`m not following the `03 part.One of my bikes is a`91 and I would be very upset if I got a big chip and had to touch it up. "Not too early for a paint job". Are you a RUB by any chance?Maybe he should sell it in the Pennysaver for $500 bucks since it`s so old. It`s got a carb on it like a farm tractor. Personally I would get done professionally if there were any doubt`s. Toby
BTW. It does not have a carb (EFI) and the first owner loaded it up with all the anniversary bling. I just hope no one shows up with some dental floss and "liberates" the emblems
spiz
Tourer
Joined: Oct 2007
Posts: 380
Likes: 0
From: canton ny
The carb was in reference to the bike being older in his eyes. I`ve an `04 with carb. A good shop should be able to blend that small of a chip in without repainting the whole fairing and it shouldn`t be a huge pricetag.Whichever way you decide to go,Good Luck,Toby
Thread
Thread Starter
Forum
Replies
Last Post
STN
Powdercoat & Paint
2
Jan 11, 2015 09:14 PM
