2009 w/ ABS handlebar change?
Cruiser
Joined: Sep 2006
Posts: 212
Likes: 31
just back from weekend here. if you're asking me for pics, sorry - i'm digitally impaired, but i ran the clutch cable down the frame like on my ol' softail. now there is an empty hole in the fairing where the cable did run, but i just ignore it...
rem
rem
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,562
Likes: 3,956
From: Vermont
Yes, you wouldn't be able to reach the bottom bolts on the tranny side cover. If you are not ready for a tranny oil change, then put the two wheels up onto 2x lumber and lean it way over onto the jiffy stand and all the fluid will go to the left of the tranny and you won't lose but a drop.
Thread Starter
|
Road Captain
Joined: Jun 2006
Posts: 548
Likes: 7
From: Pittsburgh, PA
Yes, you wouldn't be able to reach the bottom bolts on the tranny side cover. If you are not ready for a tranny oil change, then put the two wheels up onto 2x lumber and lean it way over onto the jiffy stand and all the fluid will go to the left of the tranny and you won't lose but a drop.
PM'd ya-I think I'll let them do the swap before i get it home :-)
Thanks again!
Road Captain
Joined: Jan 2008
Posts: 681
Likes: 0
From: Red&Black World
My 08 SG w/abs has yaffe apes and he sends the extensions and lines in a supersize kit. I love it. rides much better than stock. I have more leverage on the bike low speed and Hwy. My bars are even with the top of the fairing.
Tourer
Joined: Oct 2008
Posts: 376
Likes: 27
From: Weeki Wachee, Florida
HD pullbacks on an 09 ABS Ultra
Touring pullback handlebar (new for 2009), PN 56176-08 $149.95
Diamondback clutch cable, PN 38922-09 $ 99.95
Front brake line ABS, PN Upper 46711-09, Lower 41825-09 $249.95
If you are going to have them do internal wiring, you'll need the sensor kit, PN 32310-08 $89.95
Hope this helps. I ordered all of this online through Chicagoharley.com at 20% off. Saves you about $100, even after shipping charges.
Touring pullback handlebar (new for 2009), PN 56176-08 $149.95
Diamondback clutch cable, PN 38922-09 $ 99.95
Front brake line ABS, PN Upper 46711-09, Lower 41825-09 $249.95
If you are going to have them do internal wiring, you'll need the sensor kit, PN 32310-08 $89.95
Hope this helps. I ordered all of this online through Chicagoharley.com at 20% off. Saves you about $100, even after shipping charges.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Outstanding HDF Member
Joined: Feb 2005
Posts: 2,925
Likes: 5
From:
HD pullbacks on an 09 ABS Ultra
Touring pullback handlebar (new for 2009), PN 56176-08 $149.95
Diamondback clutch cable, PN 38922-09 $ 99.95
Front brake line ABS, PN Upper 46711-09, Lower 41825-09 $249.95
If you are going to have them do internal wiring, you'll need the sensor kit, PN 32310-08 $89.95
Hope this helps. I ordered all of this online through Chicagoharley.com at 20% off. Saves you about $100, even after shipping charges.
Touring pullback handlebar (new for 2009), PN 56176-08 $149.95
Diamondback clutch cable, PN 38922-09 $ 99.95
Front brake line ABS, PN Upper 46711-09, Lower 41825-09 $249.95
If you are going to have them do internal wiring, you'll need the sensor kit, PN 32310-08 $89.95
Hope this helps. I ordered all of this online through Chicagoharley.com at 20% off. Saves you about $100, even after shipping charges.
Clutch cable was fine through fairing and is ok from turn to turn.
Brake line was fine, didn't replace it.
DID replace twist grip sensor for internal wireing.
Replaced grips with Kuryayn ISO grips with Boss.
I get 10% off the parts cause I bought it there, but the labor is the killer. This is the first time I have had a dealer do work on my bike other than the 1000 mile services. Ouch.
Road Warrior
Joined: May 2008
Posts: 1,847
Likes: 6
From: FT Bragg NC
Dealer just installed my HD pullbacks on my 09 ultra with ABS. I went to see it yesturday.
Clutch cable was fine through fairing and is ok from turn to turn.
Brake line was fine, didn't replace it.
DID replace twist grip sensor for internal wireing.
Replaced grips with Kuryayn ISO grips with Boss.
I get 10% off the parts cause I bought it there, but the labor is the killer. This is the first time I have had a dealer do work on my bike other than the 1000 mile services. Ouch.
Clutch cable was fine through fairing and is ok from turn to turn.
Brake line was fine, didn't replace it.
DID replace twist grip sensor for internal wireing.
Replaced grips with Kuryayn ISO grips with Boss.
I get 10% off the parts cause I bought it there, but the labor is the killer. This is the first time I have had a dealer do work on my bike other than the 1000 mile services. Ouch.