When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wash and was the bike today and damn them rims were dirty had some stains on them. I guess my hands and fingers are to damn big cause it was a pain in the *** using Mothers wheel polish to clean them. Had lots of water spots on them. Can't get my hands and gingers in there that easy to polish them. The damn rotor are in the way are in the way and then on the rear you got the belt pulley. I said them wheels are pretty but they ain't worth a **** when you check air pressure on the front and I got a air gage with a right angle on it. Looks good on paper but in real life it ain't to fun. I would like to meet the idiot engineer that designed these wheels. Was it you Wille G?
Yep I agree. The stock wheels on the RK standard are SOOO much better looking than in past years but putting air in the tire is a PIA with the way it is.
As far as cleaning the wheels, do yourself a favor and get rid of the HD brake pads. Go with Lyndalls or others that do not make brake dust.
The brake dust causes probably 95% of the dirt on the wheels.
Also, put a few coats of good paste wax or any wax on the wheels and they will stay clean longer. Any dirt can be washed off with soapy water and a rag.
Yes, smaller hands work better then large hands, especially on the rear wheel, sprocket side.
It isn't really how big my hands are, it's the 28 spokes and all it takes to get them clean. I like the old 9 spoke wheels better. It takes forever to properly clean these wheels.
Gary D.
As far as cleaning the wheels, do yourself a favor and get rid of the HD brake pads. Go with Lyndalls or others that do not make brake dust.
The brake dust causes probably 95% of the dirt on the wheels.
I agree whole-heartily. This will likely be my first mod on my next bike because when I switch to Lyndalls on RKC, the break dust became almost nonexistent.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.