13" Cyclesmiths Question?
Thread Starter
|
Cruiser
Joined: Oct 2006
Posts: 157
Likes: 0
From: Southern Maine
13" Cyclesmiths Question?
My Dad has a 2003 FLHTCI and he is looking to put the 13" Cyclesmiths Bagger Apes on it. I'm looking for some help from those of you that have installed these bars yourself. How much additional length was required for the cables and brake lines? It seems like +7" would be ok, but I want to make 100% sure that will work before I start ordering parts. Thanks in advance!
-Brendan
-Brendan
Supporter
Joined: Jul 2007
Posts: 2,196
Likes: 10
From: Shenandoah, TX
Thats what I have on mine. I used +6 on mine with no probs. You don't have to extend the wires,theres enough. Just rerout them under the radio. "Note" be sure to debur the holes where the wires go in. Mine were very sharp and would have cut the wires. Its not a hard job, just time consumming. Take pics as you go as to not forget how things go back together. If you don't have a manual,get one. Good luck, you want reget it. One of my best mods I've done for comfort.
Last edited by glide2005; Feb 1, 2009 at 10:22 AM.
Thread Starter
|
Cruiser
Joined: Oct 2006
Posts: 157
Likes: 0
From: Southern Maine
Thats what I have on mine. I used +6 on mine with no probs. You don't have to extend the wires,theres enough. Just rerout them under the radio. "Note" be sure to debur the holes where the wires go in. Mine were very sharp and would have cut the wires. Its not a hard job, just time consumming. Take pics as you go as to not forget how things go back together. If you don't have a manual,get one. Good luck, you want reget it. One of my best mods I've done for comfort.
Thread
Thread Starter
Forum
Replies
Last Post
C908
Touring Models
1
Aug 1, 2011 09:15 PM
