Are the wires long enough?
Thread Starter
|
Tourer
Joined: Dec 2004
Posts: 448
Likes: 0
From:
Are the wires long enough?
Hey guys, I have a set of Khromewerks +2 sweeper bars coming Monday for my 09 UC. I'm planning on running the wires inside the bars. For those of you who have installed these bars, are the wires long enough without extending them?
Thanks,
Rick
Thanks,
Rick
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,549
Likes: 3,954
From: Vermont
Yes. The only thing you will need is a clutch cable #38649-08. That will also require you to purchase a tranny side cover gasket, the clutch clevis pin retaining ring, and exhaust gaskets as you have to drop the exhaust to get to the tranny side cover. If you are internally wiring them and find that you don't have enough room, you may consider purchasing the throttle sensor designed for internally wired bars which is #32310-08
Thread Starter
|
Tourer
Joined: Dec 2004
Posts: 448
Likes: 0
From:
I ordered the throttle sensor and the longer clutch cable when I ordered the bars. I did have to drop the exhaust when I changed bars on my 05 RK, but on the 09, with the redesigned exhaust, it looks like I have enough room to get the tranny cover off without dropping it. Also, any problem with reusing the tranny cover gasket? The bike only has 1600 miles on it.
Thread
Thread Starter
Forum
Replies
Last Post
cprhed
Touring Models
14
Dec 21, 2017 07:51 PM
mastery
Touring Models
5
Jan 21, 2011 07:00 PM
