Tbw help!
04-10-2009, 08:24 AM
Join Date: Sep 2008
Location: Minnesota
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Tbw help!
OK, broke the Molex pin last night on the TBW.. anyone know the part # for this? I got a 'guy' who can get it, but we need the correct #.......
crap like this always happens at midnight.. shoulda just went to bed.
04-10-2009, 08:37 AM
Join Date: Jun 2006
Location: Vermont
Posts: 26,541
Which part broke, the green clip on the jumper harness or the other end where it plugs into the wiring harness?
04-10-2009, 09:46 AM
Join Date: Sep 2008
Location: Minnesota
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Not the green clip, the Male connector pins that plugs into the Molex plug in the fairing...
Last edited by Trippie; 04-10-2009 at 09:51 AM .
04-10-2009, 10:37 AM
Join Date: Jun 2006
Location: Vermont
Posts: 26,541
70415-08 is the jumper harness $23.00 from green clip down and includes the following:
72169-07 are the 6 pins @ $.40 ea
72188-07BK is the pin housing $4.50
73212-07 is the connector anchor stud $1.95
04-10-2009, 10:45 AM
Join Date: Sep 2008
Location: Minnesota
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
and I thank you!!!
first day I could ride to work and ... well, i screwed up last night and had to drive the truck in!!
thanks again!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Granpita
EVO
3
11-06-2014 06:16 PM
Alleyn
Sportster Models
13
12-13-2013 07:18 PM
landslide03
Touring Models
9
10-05-2012 06:51 AM
LAZY RIDER 88
Dyna Glide Models
1
08-14-2010 11:24 PM
asdrsd
Ignition/Tuner/ECM/Fuel Injection
0
01-15-2007 11:55 PM