New 98" Build Finished
Thread Starter
|
Road Warrior
Joined: Jan 2007
Posts: 1,415
Likes: 18
From: Belmont, MI
New 98" Build Finished
I finished up my 98” Kury WT26g build a couple of weeks ago. After 600 miles I can say I’m very happy, actually thrilled with this combo. I don’t have any dyno numbers yet and can only compare to my previous 98” 37g build and other 95”-98” bikes I’ve ridden.
I was initially skeptical of going this route on a bagger (10.5 comp) as it is used frequently for 2-up touring. This has turned out to be a very civilized, quiet build but when you whack the throttle WOW! This is a fun bike to ride.
Rick
98” (stock cylinders bored by KOC)
Kury WT26g cams
CP 6cc domed pistons (machined from 10cc by KOC) Thanks Randy
Heads fully ported and setup for these cams.
10.5 compression (0 deck height)
.030 HG
HPI 48mm throttle body
Darkhorse balanced/plugged crank
Timken conversion
TMAX Auto Tune
Fatcat 2-1
Energy One clutch w/VPC
I was initially skeptical of going this route on a bagger (10.5 comp) as it is used frequently for 2-up touring. This has turned out to be a very civilized, quiet build but when you whack the throttle WOW! This is a fun bike to ride.
Rick
98” (stock cylinders bored by KOC)
Kury WT26g cams
CP 6cc domed pistons (machined from 10cc by KOC) Thanks Randy
Heads fully ported and setup for these cams.
10.5 compression (0 deck height)
.030 HG
HPI 48mm throttle body
Darkhorse balanced/plugged crank
Timken conversion
TMAX Auto Tune
Fatcat 2-1
Energy One clutch w/VPC
Last edited by Egldr05; Apr 20, 2009 at 05:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
