When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I average about 8,500 miles on the rear and change the front every other time I replace a rear. That's mostly 2up riding on twisty country roads. There's a lot of chip seal in this part of the world which is just a step above riding on gravel.
Michigan does a lot of the chip seal and I agree that it can be hard on tire life. I got approx. 8000 miles out of the two OEM rears. Currently running Michelins and they seem to be a little better as of now.
Approx. 9200 miles on my first 2 rear tires, and then started checking my tire pressure before every ride and got 11,700 miles out of my 3rd rear tire. Extra 2500 miles! (all three are stock dunlops) 2007 Ultra
Mark
My tech told me to check the tire pressure religiously. He said the tires will wear out quick if you don't.
09 Roadglide with Dunlop D407s on it. I have 15,000 on the bike and it will easily go another 5k with the original skins. These new tires do go the extra mile (no pun intended). This is hard for even me to believe because I never got more than 12k out of a mc tire before.
9.5k org rear, some left but changed it last spring a 10k service, was spring and a lot of rain.
Will need again in about 1k more, that will be around 20K, front and rear. so about 10.5k on 2nd rear. 20k on front.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.