ECM Calibration / Powercommander
Thread Starter
|
Advanced
Joined: Jul 2007
Posts: 84
Likes: 0
From: Waukesha, WI
ECM Calibration / Powercommander
I have a question, if I am installing the SE Heavy Breather Air Cleaner kit, and I already have a Power Commander, do I need to have the ECM calibrated or with the correct map does the Power Commander take care of the neccessary changes?
My bike is a 2006 Street Glide, I have the 95" kit with SE 203 cams, Vance and Hines true duals with Basic Slip-ons, Stock ECM.
Thanks
My bike is a 2006 Street Glide, I have the 95" kit with SE 203 cams, Vance and Hines true duals with Basic Slip-ons, Stock ECM.
Thanks
Ultimate HDF Member
Joined: Dec 2007
Posts: 9,254
Likes: 283
From: Lake City, Florida (Native)
I would recommend getting a Good tuner such as a Power Commader and Dyno it and get the best bang for your Buck.. 200.00 Well spent..
Last edited by JayStronghawk; Jul 24, 2009 at 09:30 PM.
Outstanding HDF Member
Joined: Sep 2006
Posts: 2,380
Likes: 14
From: Atlanta
GK, you will need the proper map for your setup. You would not need to have the HD ECM recalibration ("download") - the PowerCommander map will provide all that you need. If you bought the PC from FuelMoto, just email them and tell them your equipment roster and they will email the map to you. If you bought it from DynoJet direct, contact them for information on getting the proper map. As JayStronghawk says, a dyno tune by a certified tech will squeeze maximum power from your setup.
Thread
Thread Starter
Forum
Replies
Last Post
