Need Help Installing PC-V
Thread Starter
|
Outstanding HDF Member
Joined: Apr 2009
Posts: 2,582
Likes: 2
From: Central Jersey
Need Help Installing PC-V
I just recieved my PC-V today and thought I was going to install it within 1 hour. I have a 08 StreetGlide with ABS....man was I surpise....I never got it installed. I need help and where to fit the PC-V..there's NO room anywhere. I have read about people cutting the holder...but I have NO ideal what to cut. Hoping someone has pictures...maybe thats what I need. Do have to move the positive battery cable as in the directions or what. PLEASE HELP ME.....thanks.
Advanced
Joined: Jul 2009
Posts: 58
Likes: 0
The instructions should be pretty clear and the pictures are quite clear also. It can be kinda tough to stuff the wiring harness and plug into the area in front of the battery. Be patient take your time you might have to move a few of the existing wires around to make a little more room. Mine was tight but it all fit. Remember one plug goes into the ecm the unit velcros to the top of the ecm and one plug and the wires go in front of the battery. Good luck and let us know how it went.
Thread Starter
|
Outstanding HDF Member
Joined: Apr 2009
Posts: 2,582
Likes: 2
From: Central Jersey
Yes..there were directions....but nothing about cutting the ecm plate. With ABS there's no room. If anyone has pictures of a PC-V and pictures of the ecm plate cut...would be VERY helpful.
Thread Starter
|
Outstanding HDF Member
Joined: Apr 2009
Posts: 2,582
Likes: 2
From: Central Jersey
Trending Topics
Outstanding HDF Member
Joined: Sep 2005
Posts: 2,148
Likes: 2
From: Tulsa, OK
I did my 08 Ultra. The instructions don't really apply to the '08's..It was designed for the '09 and newer. The fuelmoto PCV is a retrofit..and I couldn't get mine to fit with the ECM tray.
Here is some pics of my install..
snipped from this thread
https://www.hdforums.com/forum/touri...y-harness.html
I tried forever to get that stuff tucked in on my '08.
i don't know if some of the ECM trays are different or what, but that connector will not fit in front of my ECM tray....
so I looked around, and spotted one of those 1/2" rubber mats that the wife uses to kneel on in the garden...she'll never miss just one little piece...
and cut a piece to fit nice and snug over the battery...
then stack everything on top...
Then I put the AT modules under the left side cover next to the fuses..
Here is some pics of my install..
snipped from this thread
https://www.hdforums.com/forum/touri...y-harness.html
I tried forever to get that stuff tucked in on my '08.
i don't know if some of the ECM trays are different or what, but that connector will not fit in front of my ECM tray....
so I looked around, and spotted one of those 1/2" rubber mats that the wife uses to kneel on in the garden...she'll never miss just one little piece...
and cut a piece to fit nice and snug over the battery...
then stack everything on top...
Then I put the AT modules under the left side cover next to the fuses..
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Road Captain
Joined: Jul 2008
Posts: 656
Likes: 0
From: gone
i did my 08 ultra. The instructions don't really apply to the '08's..it was designed for the '09 and newer. The fuelmoto pcv is a retrofit..and i couldn't get mine to fit with the ecm tray.
Here is some pics of my install..
Snipped from this thread
https://www.hdforums.com/forum/touri...y-harness.html
i tried forever to get that stuff tucked in on my '08.
I don't know if some of the ecm trays are different or what, but that connector will not fit in front of my ecm tray....
So i looked around, and spotted one of those 1/2" rubber mats that the wife uses to kneel on in the garden...she'll never miss just one little piece...
and cut a piece to fit nice and snug over the battery...
then stack everything on top...
then i put the at modules under the left side cover next to the fuses..
Here is some pics of my install..
Snipped from this thread
https://www.hdforums.com/forum/touri...y-harness.html
i tried forever to get that stuff tucked in on my '08.
I don't know if some of the ecm trays are different or what, but that connector will not fit in front of my ecm tray....
So i looked around, and spotted one of those 1/2" rubber mats that the wife uses to kneel on in the garden...she'll never miss just one little piece...
and cut a piece to fit nice and snug over the battery...
then stack everything on top...
then i put the at modules under the left side cover next to the fuses..
Road Warrior
Joined: Dec 2007
Posts: 1,605
Likes: 2
From: Mesa AZ
I did the same thing. worked great
