Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

speedo quit working

Thread Tools
 
Search this Thread
 
Old Jun 21, 2006 | 10:56 PM
  #1  
biker Mike's Avatar
biker Mike
Thread Starter
|
Stage I
Joined: Jun 2006
Posts: 1
Likes: 0
Default speedo quit working

Ok, there I was minding my own business when I look down and my speedo is reading zero mph. (I was cruising down the highway) Then my turn signals stopped turning off automatically. I checked the connection at the speedo. No problem there. Is there a sending unit that I can check? If so, how? Oh yeah, my bike is a '99 Road King.
 
Reply
Old Jun 22, 2006 | 12:12 PM
  #2  
dougbk's Avatar
dougbk
Road Master
15 Year Member
Liked
Loved
Joined: May 2006
Posts: 1,229
Likes: 20
From: Greater St Louis, MO
Default RE: speedo quit working

There is a sending unit on top of the transmission near the clutch release cover. They are notorious for collecting metal filings. Sometimes you can clean them and they will work, most times you have to replace them.
 
Reply
Old Jun 22, 2006 | 09:14 PM
  #3  
Kahuna's Avatar
Kahuna
Road Master
Joined: Mar 2006
Posts: 791
Likes: 0
From: Arizona
Default RE: speedo quit working

Ditto on what he said! I had to replaced mine on my '02 RKC.

ORIGINAL: dougbk

There is a sending unit on top of the transmission near the clutch release cover. They are notorious for collecting metal filings. Sometimes you can clean them and they will work, most times you have to replace them.
 
Reply
Old Jun 23, 2006 | 04:04 AM
  #4  
Devil Dog's Avatar
Devil Dog
Tourer
Joined: Oct 2005
Posts: 294
Likes: 0
From: Powderly TEXAS
Default RE: speedo quit working

My buddy had a similar problem with his 05 Ultra. He had just plugged his cell phone in the cigarette lighter plug on the fairing. The tach, speedo and turn signals quit working, along with the odometer. The problem was a blown accessory 15amp fuse.
 
Reply
Old Jun 23, 2006 | 11:55 PM
  #5  
alazlo's Avatar
alazlo
Road Master
Joined: Dec 2005
Posts: 873
Likes: 2
From:
Default RE: speedo quit working

probably got a metal beard on your speed sensor, it's magnetic. One allen bolt to get it out & clean off the beard, reinsert.
 
Reply
Old Jun 24, 2006 | 01:21 AM
  #6  
Eyespy's Avatar
Eyespy
Road Warrior
Joined: May 2006
Posts: 1,423
Likes: 0
From: Southern California High Desert, here and there....
Default RE: speedo quit working

I had the same thing happen recently. I followed similar advice as you received above, cleaned the metallic afro off the sensor, reinstalled, speedo now works as do the self cancelling turn signals. It's easy, takes only a few minutes.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikeRC
Sportster Models
0
Oct 21, 2018 03:05 PM
Gasswerk
Ignition/Tuner/ECM/Fuel Injection
3
Jul 28, 2010 11:29 AM
shake rattle n roll
General Harley Davidson Chat
1
Mar 28, 2010 01:36 AM
kyote
Touring Models
11
May 20, 2009 10:56 PM
gdw70
Sportster Models
1
Sep 13, 2005 02:52 AM




All times are GMT -5. The time now is 10:43 AM.