Hey guys. On the front docking kit, there's a flat metal brace that goes diagonally between the 2 docking points on each side. I'm missing these braces, as I bought a docking kit from a member and they weren't included. If someone has the kit not installed right now, can you measure one of the braces and give me the measurements? The distance between the holes, center to center, is the biggest thing I need, as well as the thickness of the piece. You can see the brace in this pic that I robbed from another thread. Thanks.

 

6" eye to eye from center of bolts as measured with mine on the bike but accessible.

BRB with thickness........forgot to measure..LOL

Thickness = 1/16th

 

.070" thick.
The hole spacing is aprox. 5.890" on the "sissy".

 

Thanks guys!!

 

I have an extra set and I just measured them 5 7/8" center to center, 53805-99.

Send me your address and I'll mail them to you.