I was able to score a set of used 2 point docking mounts for my project, but it came without the mounting bolts. Having never seen a set in the box or removed any to look, are the mounting bolts something special? Will any grade 8 bolts and nuts work?

If anyone has the sizes that would save me some time also.

Thanks

 

http://www.harley-davidson.com/en_US...ts/-J04760.pdf

Here you can find the part nr

 

The mounting points will be at an existing bolt hole on the struts etc.. They are usually a 5/16 bolt with a threaded backer all ready in place on an inner structure. Remove the factory bolt, measure, add the thickness of the dock hardware and go get bolts to fit.

 

What he said.

 

the front bolts are 5/16" by 1" allens the rear bolts are 5/16 by1" also There is 4 fat flat washers in the back to square up the docking hardware with the bag brace. All the parts are sitting right here in front of me

 

you need my address????

Thanks guys,