Drill Bit for cat
Thread Starter
|
Cruiser
Joined: Oct 2009
Posts: 108
Likes: 0
From: Jacksonville Alabama
Drill Bit for cat
This seems like it would be a one time use item... If anyone has one lying around we could ship them to each other and pass them around. I was wondering if anone has one they don't need and we can pass it on around...
Tourer
Joined: Jan 2007
Posts: 483
Likes: 4
I would pay to ship it down the road
This is a great idea! I already do this on the Sigforum http://sigforum.com/eve/forums/a/tpc...35/m/464101469 with the sight pusher required to move (adjust) sights on pistols. It works great, but works completely on the honor system. I would appreciate this program if we could get it working.
Seasoned HDF Member
Joined: Jan 2007
Posts: 20,616
Likes: 4,440
From: anacoco, la
good idea, but practically speaking, not so good. the cat on these bikes is not the same as the old ones that are ceramic that can be drilled and broken out through the exhaust pipe. i cut mine in half and it still took over 2 hrs to get the catalyst out! if i were to do it again, i would cut in a different spot, i cut on one side of the catalyst, i would cut right through it.
cut it and weld it, or buy a completely new head pipe.... better options.
cut it and weld it, or buy a completely new head pipe.... better options.
Thread
Thread Starter
Forum
Replies
Last Post
